I Need A Little Help

[tabman]

I just purchased a set of Version 4 XP Deus WS4 Backphones. I already have the controller and a set of WS5 headphones that I've been using and have loaded a few programs on. On those programs, I have the ID norm set to the off position, so in frequency 12 I get a ID of 88 on a clad dime. Now when I go to the settings on the WS4 puck (after I turn of the controller), in my newly programed #11 Coins, the frequency is set at 12, BUT the ID on a clad dime is 91. It's acting as if the ID norm is ON and giving me reading like it was in frequency 18 rather than 12.

Oh yeah, I just checked as the same thing is happening on my WS5 Headphones.

tabman

 

Amazon Forum Fav 👍

Upgraded Night Vision Monocular Digital Infrared Monocular Telescope for 100% Darkness with 8X Zoom - Grab it through Amazon!

[Welgund]

You should reinstall version 4 again.

 

[tabman]

I need a technician to talk with. Surely someone knows something about this, before I go to reloading vs 4 again and all my saved programs.

tabman

 

[usmcscorpio]

A technician? Sounds like you are looking for a more "formal" resolution of your problem.
Try here: DEUS Metal Detector Service and Repairs | XP Metal Detectors Americas
Hope this helps. HH

 

[tabman]

You should reinstall version 4 again.

LMAO That didn't work. Remote ID 88 on a clad dime and both the WS4 and WS5 headphones ID 91. I first set the ID NORM to off and rebuilt my 12kHz coin program in slot 11 on the remote before turning on the headphones. The question is why do the headphones not ID the same as the remote?

tabman

 

[tabman]

A technician? Sounds like you are looking for a more "formal" resolution of your problem.
Try here: DEUS Metal Detector Service and Repairs | XP Metal Detectors Americas
Hope this helps. HH

It looks like I'm going to have to make that call.

tabman

 

[Welgund]

You should reinstall version 4 again.lol

 

[Iron Buzz]

10: You should reinstall version 4 again.lol
20: GOTO 10

 

[RustyGold]

Interesting development. Keep us informed. Thanks!

 

[tabman]

I've tried it all until I'm exhausted and totally frustrated! It's not rocket science to build a program with ID norm off and save it. It's not that hard to turn off and on ID Norm. Even with ID norm off the basic factory program which is set up in 12kHz gives an ID of 88 on the remote and 91 on the headphones.

Me and a few others are apparently doing something wrong. XP should know what's causing this to happen.

I'm so wore out that I don't even feel like posting my finds today.

tabman

 

[vferrari]

I am going to fool around with this now that I better understand your issue and will get back to you. I am also seeing Andy Sabisch this weekend and will bring it up with him.

 

[tabman]

I am going to fool around with this now that I better understand your issue and will get back to you. I am also seeing Andy Sabisch this weekend and will bring it up with him.

Thanks!

tabman

 

[Eu_citzen]

Next time I'm out, I'll take a look to. I never checked the VDI on the puck.

 

[vferrari]

Next time I'm out, I'll take a look to. I never checked the VDI on the puck.

Note that the VDI only shows up when the puck is in standalone mode.

 

[Eu_citzen]

Note that the VDI only shows up when the puck is in standalone mode.

I will, thanks.

 

[tabman]

On the Deus Lite there is no on or off function for ID Norm, does the factory set the ID Norm to 'on' or is it set to 'off'?

tabman

 

[vferrari]

With the Deus Light you cannot create and save your own programs even though you can make on the fly adjustments to the preset programs. But you are correct, with the Deus Headphones alone you cannot change the default ID Norm On to Off. I think the only way you can make this work with a "Light" setup is to borrow a remote, add the the "Light" coil to the remote, then load a custom program from that remote to the coil that has the ID Norm profile setting to off. You can then use that custom program with ID Norm OFF for the headphones only (light setup) since it will be saved to the coil and you can toggle to it using just the headphones. However, all the built-in programs will default to ID norm ON (I think). Need to go verify this. I have the HF coil now and there is no ID norm setting for that coil. It is "off" by default. I will report back with some additional info after I test my theory.

 

[Eu_citzen]

I found no large difference between headphones and remote control. +/- 1 VDI was the worst it managed.
Curious on if you solved the problem?

 

[tabman]

I found no large difference between headphones and remote control. +/- 1 VDI was the worst it managed.
Curious on if you solved the problem?

Nope, even on 4kHz the I get a 90/91 on a clad dime on both headphones with the ID Norm in the off position. It doesn't matter if it's factory program or one that I built and saved myself. It seems this problem has everyone stumped. Even Moe. Now what?

tabman