How to retrieve a box buried in sandy water

[zrp31]

I have stumbled upon a box that is buried 15 ft in the ground. The issue with this, is that the box is located near a river; therefore, the water table is 4 below the surface. Below the water table, the soil is all sand (sandy water). We have attempted to reach this box by digging down to this location with a manhole and a pump; however, the sand keeps coming back up when we are excavating the sand. I am in need of a suggestion on how to retrieve this box without digging to reach it, because this is proving to not be possible. I was thinking about using a water pump, and pumping water that is above the box to below the box. This would create a "cycle" of the water possibly lift the box to this surface. I have no idea if this will work, but I am looking for some advice on how to proceed.

 

Amazon Forum Fav 👍

Family Maps of Hinds County, Mississippi, Deluxe Edition - Grab it through Amazon!

[CaptEsteban]

Have you thought about using a " cofferdam ?"

Cofferdam, cofferdam design, cellular cofferdams - Deep Excavation

 

[Hitndahed]

Depending on how "clandestine" you want to be. Something that deep in sandy soil will probably depend on using some pretty heavy machinery I think.
Although,,, you MAY be able to use plastic pipe or barrels and advance the pipe/barrel as you remove material, creating a "well" of sorts where the water could be pumped out.
And the size of the "box" may also present a problem if it is too large or heavy to retrieve through the cleared area.

Just thinking out of the "box" (sorry, I had to ,,lol)
Hit

 

[lastleg]

Just wondering how you "stumbled" on the box if it's fifteen feet under the surface. Hope
you weren't hurt.

 

[zrp31]

I located this box with a gold detector, and I have been able to probe the area to find the approximate depth of the box. We have tried to get down to the depth of the box using something similar to cofferdam, but the sand keeps back-filling before we can get anywhere.

 

[gordonquixote]

Lol...Ok

Pray tell which detector detected a box 15' deep.

 

[goldkey]

If it were me in this situation, I think I would drill down to the box and obtain a sample from the box, before attempting to retrieve the whole box.
You could do this by drilling down through a pipe. When you hit the box and drill into it, then whatever is inside the box will come to the surface.
Having someone that has the equipment to drill a well do this for you shouldn't cost that much to drill 15'.
If it's filled with gold coins you should be able to get a sample of them before going to the expense and trouble of excavating 15' in sandy water.
If you "knew" for sure that it's a gold treasure, then I would get a backhoe in there and dig a big hole, using the cofferdam method.
You may find after retrieving a sample that being next to a river, it could be anything.....part of an old car, refrigerator, old stove....who knows what.

 

[davin]

not sure but maybe a 2 box detector.

 

[giuhalftrack]

I think if you pump water under or around the box you force the box to sink, because you remove sediment and leave space for the box to go down.

If you can reach "see" the box why not solder a metal ring on it and pull it out with a winch ?
I saw this method used in a mine to pull out a semi-buried loader, but you need access to the object a big chain and lot of pulling force.

 

[GA_Boy]

If it were me, I would make myself a double edge heavy duty Whale type Harpoon.
Drive it through the top of box and flood 15' down to make a quicksand solution and at the same time us a winch to gradually lift the box.
Marvin

Here is a design, but you need one much larger and pointed so that it can be driven with a big hammer.
https://www.amazon.com/Bulk-Hardwar...=2025&creative=165953&creativeASIN=B00OBFQTN2

 

[Wrecka]

Get a massive magnet , get it to drop to the depth of the box by using a hose pumping water into the sand , hopefully it will attach if the box is metal , retrieve the box on the magnet while still displacing sand with the hose.