Help identify

dakotama95

Full Member
Feb 26, 2007
158
1
Illinois
Detector(s) used
Ace 250, White's DFX

Attachments

  • CIMG6178.JPG
    CIMG6178.JPG
    101.7 KB · Views: 773
  • CIMG6181.JPG
    CIMG6181.JPG
    71.2 KB · Views: 786
  • CIMG6177.JPG
    CIMG6177.JPG
    77.4 KB · Views: 779
  • CIMG6178.JPG
    CIMG6178.JPG
    101.7 KB · Views: 778
  • CIMG6181.JPG
    CIMG6181.JPG
    71.2 KB · Views: 775
Thats what you would call a beer bottle quartz..............O.K. O.K.....I have no Idea!!!!
I was just trying to be funny!!!! Its past my bedtime for gods sake!!! LOL Good luck with that.
Johnny 8) 8)
 

Upvote 0
Looks like Smoky Topaz.

Mike
 

Upvote 0
Eu_citzen said:
Hey what hardness is it? (check out Moh's scale http://www.webmineral.com/help/Hardness.shtml)
My best guesses would be:
1) Citrine
2) Calcite

Smokey topaz as well as smokey quartz has a rather brown color this has not...

Regards,
Eu 8)

Ok I am not really sure on how to test the hardness but I did take a stainless steel table knife and was able to scratch one of the crystals so I don't think it would rate as a topaz. So would it still be in the Citrine or Calcite range of hardness? The color is a carmel brown or amber in my opinion. Thanks for your help. It is a really nice looking rock either way.
 

Upvote 0
Ok I am not really sure on how to test the hardness but I did take a stainless steel table knife and was able to scratch one of the crystals so I don't think it would rate as a topaz. So would it still be in the Citrine or Calcite range of hardness? The color is a carmel brown or amber in my opinion. Thanks for your help. It is a really nice looking rock either way.
Check the link i provided. It has a quite good description.
Topaz -http://www.webmineral.com/data/Topaz.shtml
Hardness: 8
Citrine - (varriety of quartz) http://www.webmineral.com/data/Quartz.shtml
Hardness: 7
Calcite - http://www.webmineral.com/data/Calcite.shtml
Hardness: 3
Garnet -http://www.webmineral.com/data/Grossular.shtml
Hardness: 7.5
Here is the link again: http://www.webmineral.com/help/Hardness.shtml
Scatch object "A"(hardness known) with you unknown mineral to find out it's hardness.(If you scratch if it's less then "A" but if not it has higher then "A")
1.0-Talc
1.5- Between Talc and Gypsum
2.0 Gypsum
2.5 Finger nail
3.0 Calcite
3.5 Copper Penny
4.0 Fluorite
4.5 Between Fluorite and Apatite
5.0 Apatite
5.5 Knife Blade
6.0 Orthoclase
6.5 Pyrite
7.0 Quartz
7.5 Garnet
8.0 Topaz
8.5 Chrysoberyl
9.0 Corundum
9.5 Silicon Carbide
10.0 Diamond
 

Upvote 0
looks similar to a type of scrapolite, I have a plate sized piece of it that is very similar looking, same color and crystal habit too.

that would be my guess from what I can see and know.
 

Upvote 0

Top Member Reactions

Users who are viewing this thread

Back
Top