Gold and Silver LRL frequencies

[goldfinder]

I've heard a number of different frequencies for these metals. Also, what about nickel, iron, aluminum, 100 $ bills. There seems to be a lot of variability so are any of these testable?
Goldfinder

 

Amazon Forum Fav 👍

How to Research for Treasure Hunting and Metal Detecting From Lead Generation to Vetting - Grab it through Amazon!

[woof!]

Yes, they're all testable.

 

[aarthrj3811]

Ok. This is from Yokum's system. Here it goes: (all in MHZ)

Aluminum 22.360
Amethist 1.265
Ant 9.215
Barium 12.000
Bismuth 5.795
Cadmium 12.500
Calcium 15.465
Carbon 12.600
Chromium 12.550
Cobalt 0.850
Copper 12.125
Diamond 12.835
Emerald 6.900
FI-OP 6.755
Garnet 1.425
GOLD 3.025
Granite 4.135
Iridium 2.285
Iron 4.945
Jasper 2.665
Lead 2.585
Maganese 17.400
Mammoth Tusk
1.485
Manganese 15.800
Mercury 9.125
Molybdenum 11.485
Nickel 12.810
Palladium 2.785
Platinum 1.665
Quartz 1.000
Rhodium 7.600
Ruthenium 2.935
Saphire 11.845
SILVER 14.955
Sodium 11.700
Tantalum 4.245
Tin 9.965
Titanium 13.385
Tungsten 5.075
Uranium 7.185
Vanadium 12.405
Zinc 12.495

These are the Walkie-Talkie MHz

Aluminum 462.5625
Iron 462.6125
Carbon 467.5875
Sodium 467.6375
Copper 467.6875
Potassium 462.6000
Zinc 462.6500
Cadium 462.7000
Silver 462.5625
GOLD 462.7125

porcelain or pottery…14.72hz @ 80 degrees F.

Frequencies:
1. Gold – 5.11 to 5.15 (5.1104 is best for normal gold. Mexican gold is probably
5.1304 but experimenting will find the best frequency).
2. Silver – 5.68
3. Copper – 5.25
4. Nickel – 5.23
GEMSTONES : -11.1 TO -11.9
(TEST WITH SAMPLES OR SEND REQUEST)
DIAMONDS : -11.21
Alum….5.93

Tin….5.39
Iron...5.61
Zinc…5.34

615 sin Gold
54.50 sin Nickel
54.71 sin Silver
54.52 sin Copper
63.0986 sin Diamonds
547.2 sin water
54.21 sin Lead
54.519 sin Copper Pennies
54.70901 sin Iron

BEST RT FREQUENCIES
Gold 353
Silver 377
Copper 411
Lead 434
Iron 512
1 x Freq of metal = x 7 =




Frequencies:
1. Gold – 5.11 to 5.15 (5.1104 is best for normal gold. Mexican gold is probably
5.1304 but experimenting will find the best frequency).
2. Silver – 5.68
3. Copper – 5.25
4. Nickel – 5.23
GEMSTONES : -11.1 TO -11.9
(TEST WITH SAMPLES OR SEND REQUEST)
DIAMONDS : -11.21
Alum….5.9

Metorite…..67.484

 

[goldfinder]

Many thanks - that is quite a list - I'll have fun checking these out!
Goldfinder

 

[woof!]

I've heard a number of different frequencies for these metals. Also, what about nickel, iron, aluminum, 100 $ bills. There seems to be a lot of variability so are any of these testable?
Goldfinder

Laugh or cry, it's your choice, now you know.........

 

[goldfinder]

I think only the ones listed as in the Mhz range are that high a frequency and I question these. A lot of the others are in the Khz range. Like Gold is around 5Khz. Another I have seen is silver around 8.5Khz which is not listed.

I ran some tests with a clairvoyant who could "see" on the etheric level and could see the signal line going from a signal generator to a test metal. When they were in resonance, Gold was at 5Khz, and silver about 8.5Khz. I have constructed a frequency table as I had a 3rd metal (copper) and have correlated them with atomic weight. I know the signal line does exist and good dowsers do pick up the signal. Unfortunately the etheric level is very susceptible to our mental and emotional thoughts and opinions so any opinion does affect the results. A dowser with an opinion of there something is will get possible false signals.
Goldfinder

 

[aarthrj3811]

Yes you will. You will find that they all work. The only thing that I find is that some work better than others…Each manufacturer used different ones to match what was in the box….I use a Ranger Tell now and every one is different….
art

 

[Bullet:Mich.]

How can these be Yokum's frequencies? His equipment only holds four numbers.

 

[aarthrj3811]

I just checked one of his instruction books. that is what he has written...Art

 

[biglizer]

could someone help me with other RT frequencies or codes ??
@aarthj3811

 

[signal_line]

That calculator does not have any frequencies. Those numbers are just placebo effect. Might as well just "Make a wish" or write GOLD on a piece of paper and tape it across the calculator face. You can buy a real frequency generator for about $30. and a bent coat hanger for free.

 

[a2003minfo]

Dear aarthrj3811
Thanks for your information and the list of frequencies. so let me know your idea about support this reference with mobile software and link with the LRL set detector?
is it a correct method for find the successful way in this way?
the software name in IOS is Multi tone generator .

best regards
a.mohammadi
[email protected]