getting a v3 whites

Try looking up magic's program on the White's forum I know for a fact he can get those deep targets and he really know the V3. There is a really big learning curve on that detector so it may take some time to get the best of what it has to offer, I would say get out as much as you can to get alot of hours put in on the V3. HH
 

If your getting the V3 send it in for the upgrade so you can use the stereo mixed mode option for maximum depth (you also get the pod screws fix done for no extra charge). Also the 10 x 12 inch SEF coil is a real improvement.
My only warning with these models is that if your not using the adjustments/settings of a XLT or DFX to the full then the V models are not likely to be used to their maximum potential.
 

Good luck U. K Brian. I just saw kellyco Selling a "used" V-3, I hear they are good. Good luck... Goldentruth.
 

Dam thing is all over the place if it was not so much money I would bust it in half. Beeps constantly think it might be broke
 

Update some in my whole yard makes my machine go crazy no problem with my xlt. Found 1919 wheaty a old brass key a charm and some clad starting to get the hang of it.
 

The programme your using could be using a frequency thats being affected by EMI in your area. If you have tried a few and the problem remains then there could be a problem with the detector or the coil. I had a bad DD coil from new as did others. I would get Whites to check it out and have the upgrade.
 

Think about getting different coil
Found out to block 91 and up helps a lot at old house development. Only one 1945 wheaty rest new money think it is going to take some time sending in for upgrade probally winter don't want to be without detector
 

I don't think you should block 91 and up a silver half comes in at 93 on my detector and silver dollar is 94. HH
 

Top Member Reactions

Users who are viewing this thread

Back
Top