Garrett AT Pro

[jets12]

I have just purchased the AT Pro and took it out this morning for awhile. Using standard coin mode it almost always showed targets at 8+ inches. I was at a freshwater lake detecting a sandy swim area. I balanced detecter. I dug several hits and found a few bottle caps. I went home and buried several coins at about two inches or so and the detector showed they were at 4+ inches. Is this normal or am I doing something wrong.

 

Amazon Forum Fav 👍

A History of Mining on the Kenai Peninsula, Alaska - Grab it through Amazon!

[Silver Worm]

Must be doing something wrong. Read up on ground balancing...

 

[jets12]

Must be doing something wrong. Read up on ground balancing...

Will do. I thought I balanced according to instructions but I am new at this. I will review and try again.

 

[gleaner1]

I have just purchased the AT Pro and took it out this morning for awhile. Using standard coin mode it almost always showed targets at 8+ inches. I was at a freshwater lake detecting a sandy swim area. I balanced detecter. I dug several hits and found a few bottle caps. I went home and buried several coins at about two inches or so and the detector showed they were at 4+ inches. Is this normal or am I doing something wrong.

You are doing nothing wrong. Good luck to you with your new tecter.

 

[x512x]

Definently doing something wrong

 

[bbells]

How far off the ground is your detector?

 

[jets12]

How far off the ground is your detector?

I try and keep it an inch or so off the ground.

 

[gleaner1]

The only thing he is doing wrong is not posting his finds. He's just gotta start diggin crap.