Joeyboots
Jr. Member
- Jan 22, 2012
- 63
- 31
- Detector(s) used
- Fisher Pulse 8X/Garrett Gold Stinger/Tesoro Sand Shark/Tiger Shark/Falcon MD 20, Garrett Pro Pointer
- Primary Interest:
- All Treasure Hunting
I have a JW fisher Pulse 8X and I was having difficulty the other day. I was near an area that had some steel rail close by. Seems I adjusted the settings in the low setting to about .2. Did an air test with aluminum and it worked fine. Picking up a small piece at about 4in on low. Same day I also had a problem with my pinpointer kept chirping. Is the 8X so strong that the iron rails threw it off? My pinpointer also. I was getting ghost signals and a steady tone if i let the coil touch the ground. I have not used the detector in awhile and also ask if these get sent in for a maintenance? Any sort of calibration? Any comments on if this is one of the best commercial UW detectors? Does anyone who uses this often care to send me some tips on this detector? I operate this according to the manual but the machine was acting like it needed to be ground balanced. I paid a lot for this one. I am hoping the problem is me not the machine.