Equinox vs Deus deep gold ring

tnsharpshooter

Hero Member
Jul 10, 2012
984
990
Tn
Detector(s) used
Xp Deus 2, Xp Deus 1, Minelab Etrac, Minelab Manticore
Primary Interest:
All Treasure Hunting
I got curious and borrowed this ring from my mother in law.
2j5dgkk.jpg


Says 10k on the inside, not too big a ring not real small either.
Ring IDs 9-10 air testing with Nox 800
So off to my clean area to bury.
Buried at7" deep.
No problem for Nox hitting with good ID in window.
Park 2 sens 23 speed 7 0 iron bias.

Well I buried on deeper a good solid 9" deep, could be as deep as 9.25" deep.
Same settings as above Nox hits the ring and IDs it. ID comes in window as 8/9and 10 on sweeps. Good tone even using speed 7, checked with speed 6 too good tone.

So I got curious and went and got the mighty Deus with 9" LF coil on.
I tried hot, deep, dues fast program--- no detection period Notta.
So I went back to house and broke out round HF coil 9".
I tried hot, deep, deus fast programs no detection period Notta.
Run high sens too, GB at ground reading using pumping.
Btw 6 ticks in Deus mineral strength meter so this ground not mild.
Didn't try 11" LF coil cause I didn't have it mounted to rod. I traded one of my 11" coils off a few days ago. Just so folks understand, Deus attempts were done using reactivity levels 1,2,2.5 and 3 keeping silencer at -1.

Thought I would share.
Might be some deep rings had with Nox, just saying.
 

Last edited:
Looks like the Equinox will Eclipse the Deus as well...

The boys in France will not be happy reading this post that’s for sure.

Thanx for the update

1806C6D3-19A2-4C36-8E3F-4BA7F4573367.jpeg
 

Wonder how many 9" deep gold rings been had using Etrac and CTX??
 

TN,

Thanks for sharing!

Doc
 

can you do a test just with nox how deep will it go on that ring with lowest recovery speed? is 2 the lowest speed? will it hit at..13-15in with speed of 2?
does recovery speed of 1 exist on the machine?
 

Top Member Reactions

Users who are viewing this thread

Back
Top