Drywasher Help

[mu50stang]

I have a keene 151 drywasher and when I am running it looks like bigger gravels go to one side and the smaller dust goes to the other. I did level the sluice box but cant figure out why this is happening. Any help is appreciated.

 

Amazon Forum Fav 👍

Cry Of The Eagle: History And Legends Of The Cherokee Indians And Their Buried Treasure - Grab it through Amazon!

[kazcoro]

It has to do with how the blade spins. Think of a motor in a car that spins clockwise. When you hit the gas, it rotates with the direction of the spinning motor. Get you a shotgun shell, #8. Open it up, put in a counted amount of shot. Run it through your drywasher with your paydirt. Out in the field. Then, when you pan, see if you collect them all. That way you know its working.

 

[mu50stang]

Thanks. I wasn't to fond with the classifying screen keene has on the 151 and was thinking about trying to build a trommel that would feed the drywasher. Not sure if anyone has tried this. Any pros or cons doing this. I think the rocks being scraped by the screen might yield more gold.

 

[Goodyguy]

Thanks. I wasn't to fond with the classifying screen keene has on the 151 and was thinking about trying to build a trommel that would feed the drywasher. Not sure if anyone has tried this. Any pros or cons doing this. I think the rocks being scraped by the screen might yield more gold.

Check out the "Earthquake Vibrating Classifier" also the "Aftershock" Click the link: EARTHQUAKE Vibrating Gold Classifier

 

[jair]

Check out the "Earthquake Vibrating Classifier" also the "Aftershock" Click the link: EARTHQUAKE Vibrating Gold Classifier YouTube Link: http://www.youtube.com/watch?v=Qf8F99eg6kM

Good guy . I have a trommel set up for feeding my dry washers , I built a conveyor 12volt motor . The trommel works very well but I still have more work to do on the conveyor It keeps walking the belt to the side when dirt gets under the bottom roller . Still have more adjusting to do on it until lit really works .
But I still use the trommel with a pan under it and dump it in the the dry washer and still move a lot of dirt that way .

 

[jair]

Good guy . I have a trommel set up for feeding my dry washers , I built a conveyor 12volt motor . The trommel works very well but I still have more work to do on the conveyor It keeps walking the belt to the side when dirt gets under the bottom roller . Still have more adjusting to do on it until lit really works . But I still use the trommel with a pan under it and dump it in the the dry washer and still move a lot of dirt that way .

thought of a vibrator also . Built a vibrator on my trommel To keep it feeding . I have equipment to fab a lot of prospecting equipment . And a lot of springs from equipment we repair . Hard to find some one around the lasvegas valley that's interested in prospecting and willing to put effort in to it . I'm sure there are some just haven't hit it off with them . Trying to find a guy and his wife so my wife would enjoy it better .

 

[Goodyguy]

thought of a vibrator also . Built a vibrator on my trommel To keep it feeding . I have equipment to fab a lot of prospecting equipment . And a lot of springs from equipment we repair . Hard to find some one around the lasvegas valley that's interested in prospecting and willing to put effort in to it . I'm sure there are some just haven't hit it off with them . Trying to find a guy and his wife so my wife would enjoy it better .

If we lived out your way instead of in Indiana, my wife and I would be happy to go prospecting with you folks.
Have you tried to join any prospecting clubs near you? Might be worth a shot, usually there are lots of prospecting couples in the clubs.

GG~

 

[jair]

If we lived out your way instead of in Indiana, my wife and I would be happy to go prospecting with you folks. Have you tried to join any prospecting clubs near you? Might be worth a shot, usually there are lots of prospecting couples in the clubs. GG~

we belong to GPAA and gold searchers of Nevada . Met some couples but they don't last long after a ought a half season they give up or move .

 

[jair]

If we lived out your way instead of in Indiana, my wife and I would be happy to go prospecting with you folks. Have you tried to join any prospecting clubs near you? Might be worth a shot, usually there are lots of prospecting couples in the clubs. GG~

if I knew more a bought how to put pictures on here I'd send a picture of my Trommel and conveyor system for my dry washer . I do have a e mail of ( [email protected] )

 

[jcazgoldchaser]

 

[jcazgoldchaser]

if I knew more a bought how to put pictures on here I'd send a picture of my Trommel and conveyor system for my dry washer . I do have a e mail of ( [email protected] )

The little icons above the text box include 'Insert Image'. It has a tree in a box, 2 icons to the right of the envelope.

Click it. In the pop-up click the 'Select Files' and browse to the images on your computer. Select the image then back on the 'Insert Image' pop-up, select 'Upload Files'.

On the 'Insert Image' pop-up, you can select a tab 'From Computer' or 'From URL'. If you have the imagines on the net somewhere like shutterfly or snapfish or something, use the From URL to insert the address of the photo.

 

[jair]

The little icons above the text box include 'Insert Image'. It has a tree in a box, 2 icons to the right of the envelope. Click it. In the pop-up click the 'Select Files' and browse to the images on your computer. Select the image then back on the 'Insert Image' pop-up, select 'Upload Files'. On the 'Insert Image' pop-up, you can select a tab 'From Computer' or 'From URL'. If you have the imagines on the net somewhere like shutterfly or snapfish or something, use the From URL to insert the address of the photo.

We'll did this work ? I don't see the picture on my End .

 

[jair]

<img src="http://www.treasurenet.com/forums/attachment.php?attachmentid=907293"/> We'll did this work ? I don't see the picture on my End .

Tried agin but still don't see any thing .

 

[jair]

<img src="http://www.treasurenet.com/forums/attachment.php?attachmentid=907294"/> Tried agin but still don't see any thing .

Thanks it does work just took a little bit for the picture to come through .
Thanks again .

 

[jair]

If we lived out your way instead of in Indiana, my wife and I would be happy to go prospecting with you folks. Have you tried to join any prospecting clubs near you? Might be worth a shot, usually there are lots of prospecting couples in the clubs. GG~

jcazgoldchaser told me how to add pictures I gave it a try and worked . Ill try to get the pictures to show you my set up I'm playing with .

 

[jair]

If we lived out your way instead of in Indiana, my wife and I would be happy to go prospecting with you folks. Have you tried to join any prospecting clubs near you? Might be worth a shot, usually there are lots of prospecting couples in the clubs. GG~

this doesn't pertain to this thread but here is a pix of my trommel , conveyor and one of my dry washers .

 

[jair]

this doesn't pertain to this thread but here is a pix of my trommel , conveyor and one of my dry washers .

 

[Seden]

Mu50stang,

I just retrofitted my drywasher with a -8 screen which is simple,inexpensive and it works!

Randy-Desert Rat in good standing.

 

[jpdriver1]

very nice setup jair

 

[jair]

very nice setup jair

thanks but still need to do more on it . I need to weld bars on the drum it collects dirt and runs the belt off in just a few min. Still working on it .