Bharpring
Bronze Member
- Dec 29, 2016
- 1,451
- 5,896
- 🏆 Honorable Mentions:
- 3
- Detector(s) used
- XP Deus HF coils, Minelab Equinox 800
- Primary Interest:
- All Treasure Hunting
I'm a little late in getting this one posted, but got out to a construction site in Savannah a few days ago with the HF Elliptical Coil using 26kHz. I like the 3 tone program, setting the first tone for iron/disc at 10, then the second tone at what ever trash is infesting the site, and the third tone popping as a good target. This site had terrible soil, not mineralized but just bad- iron, aluminum, etc. I decided to play around with the tones and set the Disc (first tone) at 0.0, then the second at 58 (both first and second tones set at 120kHz for sound, and third at 994). I also set the iron vol a 0, so all conductive metal below 0.0 is silent. It worked perfectly at Reactivity 3, could get a little depth and still hear the non ferrous in the iron. Here are the finds from the that hunt a few days ago.
One of the Flying Eagles was totally encrusted in iron and the Elliptical Coil still heard it.
One of the Flying Eagles was totally encrusted in iron and the Elliptical Coil still heard it.