TheElementOfSand
Full Member
- Jul 19, 2012
- 195
- 45
- Detector(s) used
- Whites Spectrum XLT E-series, Whites Beachhunter, Garrett Ace350, Garret 76'-77'Fortune Hunter, Cen-tech Pinpointer
- Primary Interest:
- All Treasure Hunting
Getting closer to Christmas and money is getting tight here. I am just wondering if there would be a niche for me doing this. I am really handy with electronics and thought that some of you may be very interested in what I have made here. If I can get a few of you interested I will start selling my custom install. My backlight spans the whole display so everything is brightly lit. It runs off of your existing batteries. There is a small toggle switch for the backlight on the backside of the detector just past where the headphone plug sits. I will offer several colors of backlighting. I am willing to start installing them at 40$, all you pay is to ship it to me with 40$ and I will ship it back at no extra cost. I only want to accept work on out of warranty detectors as I am in no way licensed by nor do I work for Garrett. If I was to work on your detector your warranty would and will be voided! I am not an authorized retailer nor am I certified to work on Garrett detectors. If you are interested we will work out a payment arrangement and then you can ship it to me.
I will only require the box of the detector. I will not need the shaft or coil to test this.
All you will need is a Phillips screwdriver. Remove your headphones and unplug the coil from the head of the detector. Flip it over and you will see 2 phillips screws on the back side just unscrew those and the display compartment will come off.
I will only require the box of the detector. I will not need the shaft or coil to test this.
All you will need is a Phillips screwdriver. Remove your headphones and unplug the coil from the head of the detector. Flip it over and you will see 2 phillips screws on the back side just unscrew those and the display compartment will come off.