DFX stability question

[GYirga]

I have been reading up on program changes for my DFX and notice that "stability" can be a problem if you set the pre-amp gain too high. What does the machine do when it is not stable? What does it sound like when it is not stable and how do you know when you went too high?

 

Amazon Forum Fav 👍

Upgraded Night Vision Monocular Digital Infrared Monocular Telescope for 100% Darkness with 8X Zoom - Grab it through Amazon!

[Sandman]

All detectors will sound something like a strangled duck. You will get beeps all the time even when you are holding the coil still. It is then time to back off the gain and sensitivity. You will actually detect targets better with less sens. an more gain. There is a balance with proper ground balance thrown in too. You can reset the detector to the default factory settings.

HH,
Sandman

 

[patpall22]

with the DFX, I've noticed that you might as well be hunting with a shovel when the sens and gain is to high for the condishions. A good way to find the correct settings, it to set the PAG to 4 and if the detector freaks out the drop it to 3 and so on. a perfectly smoothly running machine( after a ground balance) should have no breaks in the audio threshold, and no bars, or Icons flashing on the screen. I allways start with mt detector ma max settings and try to find the highest level with stability.

 

[spez401]

get the book "digging deeper with the DFX"... cant remember the author. There is a "flow chart" image in the book that was worth the price of the entire book. I copied one and laminated it to the bottom of my DFX. It explains exactly how to adjust the PAG and sens to get the most out of the machine...

i'll see if i have a copy of it floating around. If not, i think it was posted at www.dfxonly.com
steve

 

[patpall22]

get the book "digging deeper with the DFX"... cant remember the author. There is a "flow chart" image in the book that was worth the price of the entire book. I copied one and laminated it to the bottom of my DFX. It explains exactly how to adjust the PAG and sens to get the most out of the machine...

i'll see if i have a copy of it floating around. If not, i think it was posted at www.dfxonly.com
steve

by Jeff Foster

the book is really good

 

[waseeker]

I just got that book a couple of weeks ago and it seems like it is going to be a good one but I'm not sure I'm really smart enough to understand some of the more technical stuff

What Sandman says about backing off the sensitivity will also work very well. I was having stability problems recently at a beach. I turned the sensitivity down, but also was able to turn the PAG up. Found a bunch of coins in areas that I knew had been hunted because I moved in after the others left.