Coil(s) Question

My experiance with the two coils has shown that the pin-pointing edge may go to the 8" doughtnut hole and the 9x8 has the egde on depth. This has been MY experiance OTHERS may differ.The diff is only by a fraction or two.
 

It was explained to me sometime back what the differences are between the two coils. The 9 x 8 inter coil windings is smaller than the one that's on the 8 inch coil. In other words, the inter and outer sending and receiving windings (antennas) are closer together on the 8 inch coil which makes it able to detect a target a tad closer to a wall. Not really enough to be concerned about. I mainly hunt over grass so I don't use a scuff cover to make it lighter and not have to worry about removing and cleaning between coil and scuff cover all the time. The 8 inch coil is built in such a way that the 8 inch coil is less likely to get damaged without a stuff cover on it. I like the 8 inch coil better than I do the 9 x8, but are far as performance between the two it's not enough make any real difference.

tabman
 

Last edited:
Having used both types on the 5pin models, in my expereince I'd give the spider design a very slight edge in depth, but not enough to be excited about. I personally prefer the 8" donut as it hangs up less in taller grass, brush etc.
luvsdux
 

Top Member Reactions

Users who are viewing this thread

Back
Top