Challenge. What to get?

M

Mailman22

Jr. Member
Apr 7, 2016
23
8
Primary Interest:
All Treasure Hunting
Ok, here goes, I have detected for over 20 years.
I have a whites mxt that is acting up and I have no interest in sending to have it fixed. I want a new detector.
I have read a lot about the AT Pro. It intrigues me.
Will it perform to the level of the mxt?
I have an eclipse 5.3 coil. That could sway me toward another whites machine.
What whites detector would perform to the level of the AT Pro for a $500 cost?
All I have read says that the AT Pro is a top notch detector. Is it?
Will I be disappointed with it compared to a whites mxt?
I am ready to pull the trigger on it and order a new detector with bigboyshobbies. I have read enough good reviews to feel comfortable with placing an order with Bart.
Should I go ahead and do this or maybe reconsider another mxt?
Cost is, of course, a factor.
Any input would be appreciated.
Thanks!
 

Amazon Forum Fav 👍

DR.ÖTEK Metal Detector, Waterproof Gold Detector, Pinpoint & Terrain Modes, Professional Metal Detector - Grab it through Amazon!
Upvote 0
Yeah Bart is good, my brother got his Etrac from him after using mine. The pro is a good machine too.
 

I have no experience with an MXT, so I can't give any advice on that machine. I got an AT Pro a few weeks back and I'm already enjoying it. In my local club, about half the members use an AT Pro.

I ordered a pinpointer once from Barts, and the transaction was great. Competitive price, good customer service, shipped quickly. Best of luck in whatever you decide, and of course, happy hunting.
 

I would call Bart and ask him. He is a straight shooter and gets tons of feedback from customers. I have bought 2 detectors plus some accessories from him and he has never steered me wrong. I have an At Pro and it's a darn good detector for the price as compared to a Whites detector I am sorry I can't tell you. My other detectors are an E-Trac and a Whites Spectra V3i but they are in a different class than the At Pro

If you get the AT Pro the 5x8 coil is a must and it is about $100
 

IMO, the MXT is a better machine than the AT Pro. Now, if you need a waterproof machine, that gives the AT Pro a few extra points for versatility, but, strictly as a detector, the MXT would get my nod in a head to head comparison. Now comparing them to other machines........a lot will depend on what type of detecting you plan on doing primarily.
 

I would consider an MX-5, M6 or MX-Sport depending on whether you really want to hunt in water or not. IMO these are all better choices.
 

The AT Pro is a good choice for versitility.
It is a fairly good detector and simple to operate.
Good used ones are around for $400 to $500.
 

Scott2373 said:
The MX Sport gets my nod.
Click to expand...

I would consider the mx sport if it's firmware gets settled. Also not sure if my eclipse 5.3 coil works with it.I plan on selling that if I go with the at pro.
 

send the MXT in for repair.
 

The software version is probably the same, unchanged. I know because I sent a DFX in for repair and it came back with new display but same software version. Give them a call.
 

The MXT is way better than the AT PRO! Unless you want to hunt in the water, go with another detector. May I suggest the MX Sport.
 

You can hunt in the water with most detectors, you just can't submerge the control box is all!
 

Flyadive idea about sending in your MXT to be checked out is worth a shot and this is why! Keep in mind this was about 10 or 12 years ago. I had a father and son that I use to detect with from time to time. Both swung MXT's. I had just bought an explorer SE and the son wanted to buy my Explorer XS real bad but he didn't have the money. He was a good kid so I decided to trade my XS for his MXT. He got the better end of the deal because his MXT was having problems and it was pretty beat up. I decided to send in the MXT to have them check it out. I swear to god the MXT came back almost like brand new. It had a bad coil, they replaced the coil, they also went over the MXT with a fine tooth comb. They aslo replaced the missing knobs, and fixed some of the other things that were wrong. I don't know why, maybe it was still under warranty, but they didn't charge me a penny. I only paid for shipping cost.

Bottom line is that It might be worth while to have them tell you if its worth fixing and just maybe you'll come out ahead. I'd at least give them a call to see what they can do for you. The MXT is a better machine than what you're looking at getting. Just my two cents worth! Good luck on what ever you do!
 

Why not just blow your mind and get a new Minelab 705, or a used Minelab Safari? Come on! Escape the Whites force field and learn to dig deeper! :skullflag:
 

Terry Soloman said:
Why not just blow your mind and get a new Minelab 705, or a used Minelab Safari? Come on! Escape the Whites force field and learn to dig deeper! :skullflag:
Click to expand...
I like your thoughts. Just that, I don't see many following them. I have definately considered the 705 and 705 gold. Not that many videos to support it compared to at pro. Mostly overseas videos.
 

You must log in or register to reply here.

Hows everyone today

⬅️ Previous Thread

Loking to buy a Garrett AT PRO MD

Next Thread ➡️

Top Member Reactions

Users who are viewing this thread

Total: 2 (members: 0, guests: 2)
We Dig Metal Detectors

Latest Discussions

Back
Top