BET YOU DIDNT KNOW THE SOURCE OF THESE IDIOMATIC EXPRESSIONS

DeepseekerADS

Gold Member
Mar 3, 2013
14,880
21,733
SW, VA - Bull Mountain
Detector(s) used
CTX, Excal II, EQ800, Fisher 1260X, Tesoro Royal Sabre, Tejon, Garrett ADSIII, Carrot, Stealth 920iX, Keene A52
Primary Interest:
Other
BET YOU DIDN'T KNOW THE SOURCE OF THESE IDIOMATIC EXPRESSIONS

Early aircraft's throttles had a ball on the end of it, in order to go full throttle the pilot had to push the throttle all the way forward into the wall of the instrument panel. Hence "balls to the wall" for going very fast. And now you know, the rest of the story.

********************************* During WWII , U.S. airplanes were armed with belts of bullets which they would shoot during dogfights and on strafing runs. These belts were folded into the wing compartments that fed their machine guns. These belts measure 27 feet and contained hundreds of rounds of bullets. Often times, the pilots would return from their missions having expended all of their bullets on various targets. They would say, �I gave them the whole nine yards,� meaning they used up all of their ammunition.

********************************* Did you know the saying "God willing and the creek don't rise" was in reference to the Creek Indians and not a body of water? It was written by Benjamin Hawkins in the late 18th century. He was a politician and Indian diplomat. While in the south, Hawkins was requested by the President of the U.S. to return to Washington . In his response, he was said to write, "God willing and the Creek don't rise." Because he capitalized the word "Creek" it is deduced that he was referring to the Creek Indian tribe and not a body of water.

********************************* In George Washington's days, there were no cameras. One's image was either sculpted or painted. Some paintings of George Washington showed him standing behind a desk with one arm behind his back while others showed both legs and both arms. Prices charged by painters were not based on how many people were to be painted, but by how many limbs were to be painted. Arms and legs are 'limbs,' therefore painting them would cost the buyer more. Hence the expression, 'Okay, but it'll cost you an arm and a leg.' (Artists know hands and arms are more difficult to paint.)

****************************** As incredible as it sounds, men and women took baths only twice a year (May and October). Women kept their hair covered, while men shaved their heads (because of lice and bugs) and wore wigs. Wealthy men could afford good wigs made from wool. They couldn't wash the wigs, so to clean them they would carve out a loaf of bread, put the wig in the shell, and bake it for 30 minutes. The heat would make the wig big and fluffy, hence the term 'big wig'. Today we often use the term 'here comes the Big Wig' because someone appears to be or is powerful and wealthy.

********************************* In the late 1700's, many houses consisted of a large room with only one chair. Commonly, a long wide board folded down from the wall, and was used for dining. The 'head of the household' always sat in the chair while everyone else ate sitting on the floor. Occasionally a guest, who was usually a man, would be invited to sit in this chair during a meal. To sit in the chair meant you were important and in charge. They called the one sitting in the chair the 'chair man.' Today in business, we use the expression or title 'Chairman' or 'Chairman of the Board.'

********************************* Personal hygiene left much room for improvement. As a result, many women and men had developed acne scars by adulthood. The women would spread bee's wax over their facial skin to smooth out their complexions. When they were speaking to each other, if a woman began to stare at another woman's face she was told, 'mind your own bee's wax.' Should the woman smile, the wax would crack, hence the term 'crack a smile'. In addition, when they sat too close to the fire, the wax would melt. Therefore, the expression 'losing face.'

********************************* Ladies wore corsets, which would lace up in the front. A proper and dignified woman, as in 'straight laced' wore a tightly tied lace.

********************************* Common entertainment included playing cards. However, there was a tax levied when purchasing playing cards but only applicable to the 'Ace of Spades.' To avoid paying the tax, people would purchase 51 cards instead. Yet, since most games require 52 cards, these people were thought to be stupid or dumb because they weren't 'playing with a full deck.'

******************************** Early politicians required feedback from the public to determine what the people considered important. Since there were no telephones, TV's or radios, the politicians sent their assistants to local taverns, pubs, and bars. They were told to 'go sip some Ale and listen to people's conversations and political concerns. Many assistants were dispatched at different times. 'You go sip here' and 'You go sip there.' The two words 'go sip' were eventually combined when referring to the local opinion and, thus we have the term 'gossip.'

********************************** At local taverns, pubs, and bars, people drank from pint and quart-sized containers. A bar maid's job was to keep an eye on the customers and keep the drinks coming. She had to pay close attention and remember who was drinking in 'pints' and who was drinking in 'quarts,' hence the phrase 'minding your 'P's and Q's'.

********************************** One more: bet you didn't know this! In the heyday of sailing ships, all war ships and many freighters carried iron cannons. Those cannons fired round iron cannon balls. It was necessary to keep a good supply near the cannon. However, how to prevent them from rolling about the deck? The best storage method devised was a square-based pyramid with one ball on top, resting on four resting on nine, which rested on sixteen. Thus, a supply of 30 cannon balls could be stacked in a small area right next to the cannon. There was only one problem....how to prevent the bottom layer from sliding or rolling from under the others. The solution was a metal plate called a 'Monkey' with 16 round indentations. However, if this plate were made of iron, the iron balls would quickly rust to it. The solution to the rusting problem was to make 'Brass Monkeys.' Few landlubbers realize that brass contracts much more and much faster than iron when chilled.. Consequently, when the temperature dropped too far, the brass indentations would shrink so much that the iron cannonballs would come right off the monkey; Thus, it was quite literally, 'Cold enough to freeze the balls off a brass monkey.' (All this time, you thought that was an improper expression, didn't you.)

If you don't send this fabulous bit of historic knowledge to any and all your unsuspecting friends, your hard drive will kill your mouse.
 

Great post Deepseeker,will pass along to fellow history buffs.
 

Deep,

To add to your list from the early days on the frontier: " going off half cocked", a flash in the pan", all pertained to the firing of the flintlock firearm, but have grown to have many different meanings in modern society.....as, "acting without thinking", and drawing attention to ones self. Very good and interesting post.....Gary
 

love it Deepseeker, keep em coming
 

Heres a little trivia, where did the word cop (as in police officer)come from.

Constable on Patrol

***********************************

Here's another tidbit: Ever heard the phrase "Hammer Down" for driving fast?

Back in the early days of long-haul trucking, "Cruise Control" was yet to be invented.
So, what was a tired trucker to do when his foot was exhausted and he had to run at
full-speed for miles and miles? Well, drivers carried a 2 lb. sledge back then, and they
would simply lay the sledge hammer on the throttle pedal, thereby holding it to the
floor! The phrase "Hammer Down" was literally true!
 

Copper buttons... They used to have copper buttons on their coats and that was the first thing people saw, the coppers... here come the coppers, shortened to cops.
 

Copper buttons... They used to have copper buttons on their coats and that was the first thing people saw, the coppers... here come the coppers, shortened to cops.

Very close GiB.
 

I'll spill the beans as to what I read about it.The first official police dept in New York issued copper badges.
 

Here's what I heard. In the early days of square rigged sailing ships, each mast carried three sails. A brig had two masts, and a ship had three masts, the fore mast, the main mast and the mizzen mast. The sails were also called yards, and were attached to "yard arms," cross ways of the mast. Further more, each sail or yard had a name. The bottom front sail was the fore course, going up the next was the fore top sail (topsil), and the third the top gallant (tagalnt). Then on the center or main mast, there was the main course, the main topsil, and the main tagalnt, and last the third mast was the mizzen, and the same holds true, the mizzen course, etc. There were also jib sails forward, and a fore and aft spanker attached to the mizzen mast aft. When a ship was under full sail, she was under "all nine yards." As ships advanced in technology, they became sleeker and stacked on more sails, but originally they had nine yards. Don't know how true that is, but that's what I was told long ago.
 

Last edited:

Top Member Reactions

Users who are viewing this thread

Back
Top