Best FBS Coil????

[DiggerinVA]

I am looking to upgrade my coil on my Explorer SE.....i currently use a 10.5" slimline coil. I am looking at the 11" pro coil and the 10x12 SEF coil......I am leaning toward the SEF but keep finding a review here and there that says the extra weight is not worth the benefits over the pro coil. I am also considerinng the 13" ultimate coil. I am first looking for the best depth/seperation....but also the cleanest tones and also weight is considered. Just looking for some opinions from experience with any or all of these coils. Thanks.

 

Amazon Forum Fav 👍

A History of Mining on the Kenai Peninsula, Alaska - Grab it through Amazon!

[Fletch88]

The 13" Ultimate is the lightest but it was still too heavy for my liking on the S shaft of the etrac I had. The 11" pro was about perfect size to me.

 

[DiggerinVA]

The 13" Ultimate is the lightest but it was still too heavy for my liking on the S shaft of the etrac I had. The 11" pro was about perfect size to me.

I have read reports of the sef coil falsing less on deep iron than the pro.....and also the seperation being a touch better. What do you think Fletch?

 

[cudamark]

Usually depth and separation are mutually exclusive. To get one, you have to sacrifice the other to some degree. Generally a concentric coil will give more depth (in the center of the pattern) and better separation than a DD. The DD has a bigger "sweet spot" but slightly less depth. In many cases, "more" and "less" are relative and are so slight as to be unimportant, but in some cases it can be dramatic. The WOT coil is a very good option for the Explorer if you are hunting wide open spaces with little junk to contend with. Around a fire ring.....it's not near as good as an X-5 or 5 X 10 Joey. The small coils aren't going to find 16" deep targets like the bigger ones either, so, you need to decide which is more important to you. You can keep a variety and swap them out as needed. That's what I do.

 

[Mach1Pilot]

You'll probably find equal numbers of fans of all three of those, but most all will say any are better than the slimline.

 

[DiggerinVA]

I have pretty much decided on the 6x8 sef for my small "trash" coil. Just cant make up my mind on the larger one. I wanted to make sure this machine was a keeper before I spent much on coils. I really like the explorer and have done well with it on both coins and relics so far so I guess its time for some coils
Hey Keith...do you keep the sef coils in stock?

 

[Longhair]

Personally, I'll never buy a piece of eastern European equipment again. IMO, quality is both performance AND component. Having three of them, two with issues, one of which is non-functional at all, I can say that they are junk compared to Sun Ray and Coiltek. The higher price of good stuff (like Sun Ray & Coiltek) is worth it because you don't have to spend the money more than once. I work too hard for my money to throw it away.

 

[Mach1Pilot]

Josh -

Unfortunately there is only one source for new SEF coils in the USA..... and I don't like referring to my competition.

We do have two used coils that may be of interest to you... a 10x12 SEF and a white Ultimate. I don't have the ultimate listed yet but plan to have it up in a day or so.

My favorite small FBS coil hands down is the Sunray X5... I will always keep one with my Etrac for trashy spots. You may also want to take a look at the mid-sized 10x5 Coiltek.... the target ID and stability is a lot better than the 8x6 SEF. But, it does come at a higher price tag.