Battery Charger Question !!

[Gold_FInger]

I just purchased an Excaliber II that comes with a charger that says Input 110V, Output of 14.3v DC..60HZ...

My question is I have a Whites battery charger that says Input 120, Output 11.6v DC 60 HZ...that does both "fast" charge and "trickle" charge...Can I use it to trickle charge my battery on the Excaliber..?? I have read stories about batteries being cooked using Minelabs own battery charger...

Thanks...

 

Amazon Forum Fav 👍

How to Research for Treasure Hunting and Metal Detecting From Lead Generation to Vetting - Grab it through Amazon!

[Frankn]

BRC First off the 120 or 110 voltage is 60Hz AC . the lower voltages are DC. The 11.6 is for charging Ni Cad type batteries for the Whites re charable battery pack. This voltage is to low to recharge the Ex cal pack. Frank

 

[Gold_FInger]

BRC First off the 120 or 110 voltage is 60Hz AC . the lower voltages are DC. The 11.6 is for charging Ni Cad type batteries for the Whites re charable battery pack. This voltage is to low to recharge the Ex cal pack. Frank

Thanks Frank.....Then Ill keep em both charging separately and not use one for both....

Barry