gary s fl
Sr. Member
- Mar 21, 2005
- 264
- 53
- Detector(s) used
- Equinox 800, CTX 3030, Explorer II, Excalibur, Aquasound, TDI, GB 2, Quick-triggered CZ-21, AU-21, G2, Comprade 7" & 5.5"
- Primary Interest:
- Other
Bad boy's pipe?
Found the copper object and barber a few feet apart late this evening. The large end had approx. 3/8" fine threads inside and the hole inside narrows quickly to approx. 3/16". The hole probably goes all the way through. It looks kind of like some of the hash pipes I've found but this was deeper and the park is old. Weighs just over 1/2 oz. Any ideas?
I have to mention the dime find, it was an 'oh my gosh'. I got a PT signal but it seemed deeper than most so I went ahead and dug it. About 3" down is the PT. I probed the hole again and got a faint good signal along with iron. Dug a couple of inches deeper and saw a very rusted 5/16" nut but thought no way, there's something else down there. Found the dime off the the side and slightly lower than the level of the nut. This was the first time I've made a good find under non ferrous trash. HH
Found the copper object and barber a few feet apart late this evening. The large end had approx. 3/8" fine threads inside and the hole inside narrows quickly to approx. 3/16". The hole probably goes all the way through. It looks kind of like some of the hash pipes I've found but this was deeper and the park is old. Weighs just over 1/2 oz. Any ideas?
I have to mention the dime find, it was an 'oh my gosh'. I got a PT signal but it seemed deeper than most so I went ahead and dug it. About 3" down is the PT. I probed the hole again and got a faint good signal along with iron. Dug a couple of inches deeper and saw a very rusted 5/16" nut but thought no way, there's something else down there. Found the dime off the the side and slightly lower than the level of the nut. This was the first time I've made a good find under non ferrous trash. HH