Aquapulse 1B -Voltage test?

[crzhors]

Hello, As my memory isn't what it was, I have forgotten what the full charge voltage is on my Aquapulse 1B. It's been is storage for a while. Thahks, JD

 

Amazon Forum Fav 👍

How to Research for Treasure Hunting and Metal Detecting From Lead Generation to Vetting - Grab it through Amazon!

[Melbeta]

8 hours charging time.......

The AQUAPULSE 1B (38cm) is an underwater metal detector employing a large diameter search head mounted on the end of a telescopic arm. The 1B can detect objects up to a range of 3m (10ft). This makes it the most powerful unit on the market. Apart from the sensitivity threshold control, the 1B underwater metal detector has an additional control to enable the whole range of AQUAPULSE coils and accessories to be used with it. The same control can be used to reject surface clutter such as ring pulls, cigarette foil etc., often found buried in the sand or mud. The internal NiMH battery pack allows in the order of 10 hours operation.

Rare detector! I do not know the voltage, but if you have the charger, which I assume you have, I would charge it for at least 8 hours, it should give you around 10 hours of operation. You can even used it longer then 8 hours if not charged for a long time. When it hits its limit, It should stop drawing current, and become stable. Then shut off the charger unit.
Melbeta