A 22LR casing ID please

[richtam123]

Trying to ID this casing found along a Winchester Repeater from the early 1900's. It's tough to tell from the photo but the headstamp is a "P" with a star that is part of the "P" and a triangle mark to the left of the "P." It's 6.3500 mm wide and 15.875 mm tall.

 

Amazon Forum Fav 👍

DR.ÖTEK Metal Detector, Waterproof Gold Detector, Pinpoint & Terrain Modes, Professional Metal Detector - Grab it through Amazon!

[cheese]

Peters is one with a P on the headstamp like this:

PMC makes some with a triangle on the headstamp like this:

Maybe an early type of one of these? I can't come up with anything else.

 

[NOLA_Ken]

Can you try to get a better pic? Or maybe draw it on a piece of paper?

 

[richtam123]

A little better shot. It's tough to get a good shot without a macro lens.
Possibly a .22 short?

 

[NOLA_Ken]

Hmm I still don't recognize it, I was thinking it might be European in origin. Try this site and see if you can find a match : MUNICION.ORG

 

[richtam123]

A better view of the .22

 

[mike da man]

 

[pistol-pete]

Been racking my brain ever since this appeared and finally found it. Powers-Rawl Tool driver cartridge, made by CCI for them 1998----