MackDog
Bronze Member
- Nov 20, 2013
- 1,414
- 2,745
- Detector(s) used
- Garrett At Pro, 8 x11" and Nel Storm coils
Garrett Propointer er, Pro Pointer AT
White's V3i Standard, 10" DD, 13" Ultimate and 4 x6" sniper, 6 x10 coils, Drect 12 x 15 coil
Whites MX Sport With Detec
- Primary Interest:
- Metal Detecting
What can I say WOW. Started with the AT Pro first signal says VDI of 91 solid silver tone and 8" deep. Dig down 10 " and come out with my second ever Shield nickel it's pretty toasted but shiny on one side. I was disappointed new it sounded like big silver. Rescanned the hole and BANG 91 again pinpointed bottom of the hole and hit a 1899 Barber quarter that had the green mark where it was covered by the shield. Man what a 2 coin spill especially for Spokane. Used the Pro for another hour and a half maybe 27 clad couple of wheats that's it. Switched to the V3i and got a 85 VDI high tone and green freq at 5" I'm thinking silver quarter again, no but a nice 925 ring. Swung for another hour or so get a 86 signal high tone sounds like another quarter but then shows in the red frequency thinking junk but dig it anyway. Get a 1922 merchants 5 buck token? it's in awesome shape. Also got a gold and silver plated butterfly at 6". It seems both detectors are always trying to out do each other so I use them both. The Pro with the Big 17" NEL is heavy so when I tire I switch to the V3i. Showed targets as they were dug and semi cleaned still working on the Shield so that will be a while. Thanks for looking and happy hunting
Upvote
18