1912 logging camp sledge hammer restore

[highnam]

I wish I would have taken some before pics as I didn’t expect such great results. I soaked the hammer in vinegar for three weeks changing the vinegar weekly and hitting it with a wire brush. I finished it with a wire wheel and just need a handle

 

Amazon Forum Fav 👍

Treasure of Victoria Peak - Grab it through Amazon!

[USMC Reaper]

Great job!

 

[Gene Mean]

Looks good!

 

[Trezurehunter]

Looks like you did a nice job cleaning it up.

 

[Professor of Engineering]

Very nice restoration!

 

[TimberCrack]

Gonna put a new handle and re-use it??

 

[against the wind]

White Cider Vinegar,,
There is a product called, "Renaissance Wax" that will keep it from rusting up again.
Great Job

 

[Davers]

I wish I would have taken some before pics as I didn’t expect such great results. I soaked the hammer in vinegar for three weeks changing the vinegar weekly and hitting it with a wire brush. I finished it with a wire wheel and just need a handleView attachment 1610692View attachment 1610694

Great Job.

That also reminds me I got lots of Iron to preserve , or I should have left them in the Hole.

 

[A2coins]

good job nice relic

 

[highnam]

Gonna put a new handle and re-use it??

new handle and a special spot in retirement...
Haha sure would be cool to use it one more time tho

 

[highnam]

White Cider Vinegar,,
There is a product called, "Renaissance Wax" that will keep it from rusting up again.
Great Job

Nice, first I’ve heard of it, I’ll definitely try it. Thank you

 

[highnam]

good job nice relic

Thanks, A2!

 

[GA_Boy]

Yours has a taper similar to this 20 pounder.
Marvin
https://www.ebay.com/itm/Vintage-Kl...941349?hash=item2f1d1d96e5:g:x70AAOSwtaRa44Xn

 

[highnam]

Yours has a taper similar to this 20 pounder.
Marvin
https://www.ebay.com/itm/Vintage-Kl...941349?hash=item2f1d1d96e5:g:x70AAOSwtaRa44Xn

wow GA Boy!
i believe this could be a Klein & Logan based off of the design and they were selling R.R tools.
This camp was 1912 and fits the era. I found a bit of info as well.mine is 6 pounds and falls into the correct length for a K&L 6#

Thank you for the tip!

 

[Hawks88]

Beautiful job on the restoration. Congrats

 

[highnam]

Beautiful job on the restoration. Congrats

Thank you, Hawks88!