Quiet Mini Ball mill, OHH soo Quiet and total cost to me was 5$

Dustedyou

Hero Member
Dec 27, 2012
611
399
Albuquerque
Detector(s) used
Gold Bug, Treasure finder. Gold Cube, Chisel, Hammer, Eye Loop.
Primary Interest:
Prospecting
OK so I cleaned up a lady's yard because her husband had cancer.. hauling off a ton of junk to the dump.. and she gave me this Husky mini Concrete mixer, normally new its 380$ but on Craigs-list there pretty regularly 189$ anyhoo free for a good deed!.. next i needed 2 tires (unfortunately New Mexico's ravines are full of junk and it took me 20 minutes to find 2 that would work). Took 2 tires home cut off 1 side on each tire to get the depth right, and cut them down 1 side to get them into the drum. {} inside the drum. now the reason i wanted tires in it is due to GoldTramps Drum wearing out, and mines in the back yard.. so there we were trying for quiet.. It's very quiet~! yay moment.

I used some old Railroad tie-straps i had in a bucket (they weigh about 5 lbs) as my balls (hehe) and its turning it to paste!
IMG_20130817_162753_681.jpgIMG_20130817_162802_691.jpgIMG_20130817_162815_474.jpgIMG_20130817_162915_293.jpgIMG_20130817_162924_448.jpg

and video

Mini Ball Mill Quiet Cheap - YouTube
 

Great idea Dusted. How long did it take to make suck large rocks into a paste? I have often thought of doing the same thing, minus the tires, just never ran into the right cement mixer. Do yours have a plastic tub, or is that metal painted?
 

the Steel TUB is lined with 2 Parelli tires.. its working out very well i'm going thru about a shovel full in an hour sometimes 2.. and the tires are taking all the abuse.. there walls cover the back side of the tub and the sides..
 

And how fine does it grind the material.

pretty much to paste.. I panned a couple of hundred lbs of it this weekend and then did the cleanup on it... and got 2x the amount of material out of it..lol gotta figure that out.
I'll post some pictures on the pan this evening..it's Interesting.
 

lol seen that before..lol
 

Top Member Reactions

Users who are viewing this thread

Back
Top